Elsema iS260D Manuel de l'utilisateur - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Elsema iS260D. Elsema iS260D 11 pages. Swing gate opener
C. INSTALLATION OF REAR BRACKET
: Before securing the rear bracket to the pillar check the front bracket to make sure can be
Step 1
welded to a solid point on the gate leaf.
Fully close the gate. Fully extend the motor shaft. This will be the gate's fully closed position
Connect the rear and front brackets to the motor
Hold the rear bracket onto the pillar with the calculated A and B values.
Move the motor in a vertical direction until the fixing zone is in a solid area of the gate leaf for
the front bracket.
For inward opening, the fully extended motor shaft will be the closed limit of the gate.
Open position of the gate is adjustable by the shaft clamp.
Step 2: Then fix the rear bracket to the pillar.
Step 3: Fix the operator on the rear bracket.
4
iS260/iS260D SWING GATE OPENER MANUAL