Elsema G-2025 Manuel - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Elsema G-2025. Elsema G-2025 14 pages. 4g receiver with relay output for opening sliding, swing gates, doors or switching devices
Imprimer la page
Change the time & date
PwdTyymmddhhmm#
o
1234T yy (year) mm (month) dd (day) hh (hour) mm (minute)
E.g If you want to change time & date to 14
1234T1806140900#
Setup Authorized Numbers
PwdAserial number#authorized number#start time# end time#
o
Serial number: User position 000-999.
Start time: yy (year) mm (month) dd (day) hh (hour) mm (minute)
End time: yy (year) mm (month) dd (day) hh (hour) mm (minute)
E.g The following number 0435792468 is to be setup as the second user; the following SMS command is
needed:
1234A002#0435792468# : the user 0435792468 can call anytime to access the GSM receiver.
1234A004#0450755623#1505040800#1510061700#: the user 0450755623 on position 4 can
only access the GSM receiver from 4
Authorized numbers are mobile numbers of all users who will be using their phones to operate the GSM
receiver.
Serial number is the position of all stored numbers (authorized users). 001-999 users
It is strongly recommended that the first 6 numbers are mobile numbers (not landline). If inputs 1 & 2 are
used and is activated, an SMS message will be sent to the first 6 stored numbers (serial numbers 001-006)
and the unit will call them as well. The calling feature cannot be disabled. If you don't want to receive any
SMS messages or calls at all, leave the first 6 spots blank.
Power failure SMS will only be sent to the user in location 001
Check which mobile number is located at a particular location (Serial number)
PwdAserial number#
o
E.g If the user wants to see which number is stored on position 30 (serial number 30), the following SMS
command is needed:
1234A030#
Check users in multiple locations
PwdALserial number start#serial number end#
o
E.g If the user wants to see which numbers is stored on position 100 to 200, the following SMS command is
needed:
1234AL100#200#
www.elsema.com
th
June 9am 2018, the SMS command needed is:
th
of May, 2015 8:00am to 6
Page 8
4G Receiver with relay output, G-2025
th
of October, 2015 5:00pm.
ELSEMA