Elsema GIGALINK GLR2702240 Series Manuel - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Elsema GIGALINK GLR2702240 Series. Elsema GIGALINK GLR2702240 Series 7 pages. 2-channel 27mhz receiver with main ac supply

Imprimer la page

Four billion codes

The user can easily change the code on all the channels. Momentary joining the two CC pins on the receiver

board sets all channels to one random code. One of 4,294,967,296 possibilities is selected.

Code Programming

For code programming, please refer to the separate programming instructions.

When programming is completed and the GIGALINK cable is removed from the receiver-coding socket, the 2-

way dip switch is used to select different output modes. This is described below.

Output Modes

Relay output on the receiver can function in either momentary or latching mode. By default the mode is set to

momentary. Modes selectable from the 2-way dipswitch. Dipswitch 1 corresponds to relay channel 1 and

dipswitch 2 corresponds to relay channel 2.

Factory Default = Momentary

Momentary - Output is active for as long as the transmitter button is pressed.

This is a standard mode on most automatic gates or garage door openers.

Latching

- Output remains active until next press of the transmitter button.

Similar to switching "on" and "off" a light.

Security

- Output remains active until power to the receiver is removed. Similar to security alarms

Latching

and fire alarms.

Customised Software

Custom output modes can be programmed to do special functions. Call Elsema for more details.

240 AC Supply, Antenna and Relay Connections

AC power supply and relay connections are via

pluggable type terminal

damage the microcontroller.

Applications

The receiver output can be set to different modes which allows it to be used in many diverse applications such

as automatic gates, security, timer controlled outputs and simple on/off functions etc.

Unique Code System

The microcontroller EEPROM allows large volume users to have a unique code. This enables Elsema to offer

everyone "your own" radio control.

block. Do not connect the supply to the 2.5-mm coding socket since connection will

2-Channel 27MHz Receiver with 16A Relay Output- GLR2702240

the pluggable type terminal

block. Antenna is via a two-way

ELSEMA