Elsema Gigalink GLR2708 Manuel - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Elsema Gigalink GLR2708. Elsema Gigalink GLR2708 7 pages. 8-channel 27mhz receiver with open collector outputs
Également pour Elsema Gigalink GLR2708 : Instructions de configuration et de programmation (8 pages)
Imprimer la page
Technical Data
Supply Voltage
Current Consumption 14mA standby, 22mA if all outputs "On"
Receiving Frequency 27.195MHz
Operating Temperature
Type of Demodulation Narrow-bandwidth Frequency Modulation (FM)
Sensitivity 1uV (for output to activate)
Decoding System Microcontroller (32-bit word 4.29 x 10^9 codes)
Code Combinations 4,294,967,296
Outputs
Connections
Antenna
Dimensions 96 X 70 X 15 mm
Mounting Hole Size 3.97 mm or 5/32"
Mounting Hole Spacing
Weight 68g
Useable Transmitters All Elsema Type 27MHz GLT-... series
Useable Operating Range
10.0 to 28 V AC/DC. Absolute maximum DC 40 Volts
Can use Elsema 12-volt AC power pack (PP12)
Supply lines should be less than 3 metres long to comply with radio frequency
authorities
-5 to 50°C
Range
Eight Open Collectors (See chart for Collector Currents)
Chart indicates that eight outputs can be ON simultaneously with each output
collector current being 125mA. Outputs can hold 40 Volts in "Off" state.
Supply & Antenna: 3-way screw type terminal block.
8 Outputs: 9-way screw type terminal block. (8 open collectors plus Ground)
50 ohms, 27MHz CB-Antenna or approximately 1m long & 1mm thick piece
of wire
Length 85 mm (3.34")
Width 60 mm (2.36")
Up to 350m with proper 50 ohms, 27MHz CB-Antenna. Up to 200m with 1m
long antenna wire. Antenna wire should be extended and away from metal.
Ranges assume line-of-sight operation.
8-Channel 27MHz GIGALINK™ Receiver with open collector outputs, GLR2708
- 4 -
ELSEMA