Datakom DKG-175 Manuel de l'utilisateur - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Datakom DKG-175. Datakom DKG-175 11 pages. Automatic transfer switch

Imprimer la page
Datakom DKG-175 Manuel de l'utilisateur
DKG-175 User Manual
 Electrical equipment should be installed only by qualified specialist. No responsibility is
assured by the manufacturer or any of its subsidiaries for any consequences resulting from
the non-compliance to these instructions.
 Check the unit for cracks and damages due to transportation. Do not install damaged
equipment.
 Do not open the unit. There are no serviceable parts inside.
 Fuses must be connected to the power supply and phase voltage inputs, in close proximity of
the unit.
 Fuses must be of fast type with a maximum rating of 6A.
 Disconnect all power before working on equipment.
 When the unit is connected to the network do not touch terminals.
 Any electrical parameter applied to the device must be in the range specified in the user
manual. Although the unit is designed with a wide safety margin, over-range parameters may
reduce lifetime, alter operational precision or even damage the unit.
 Do not try to clean the device with solvent or the like. Only clean with a dump cloth.
 Verify correct terminal connections before applying power.
SAFETY NOTICE
Failure to follow below instructions
will result in death or serious injury
V-1
(24.07.2017)
- 2 -