Cayin HA-300 Manuel de l'utilisateur - Page 15
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Cayin HA-300. Cayin HA-300 19 pages. Direct heated triode tube headphone amplifier
Imprimer la page
_Connect to
Speakers_
Connect the speaker to the terminals on the rear panel (as illustrated)
Connect the red speaker cable to the positive terminal (+) and the black speaker cable to the
negative terminal (COM)
If the positive and negative terminals are reversed during connection, the speaker will be out of
phase, the sound will become unnatural and does not have focus.
Speaker (R)
Connecting Speaker Cable
If your speaker cable is terminated by spade speaker
connector, turn the top part of the speaker terminal anti-
clockwise to release the locking mechanism, insert the
spade connector into the gap as illustrated, and tighten
the speaker terminal again.
If your speaker cable is terminated by banana speaker
connector, you can insert the connector to rear
connection hole directly. Some banana connector has a
locking mechanism, please refer to the instruction of the
banana terminal for detail.
If your speaker cable in not terminated (bare wire), you
should follow the procedure as spade connector but you
need to insert the bare wire into the hole of the center
rod of the speaker terminal before you tighten the terminal.
Red
Black
15
Red
Black
Speaker (L)
Banana
Spade
connector
connector
Bare Wire