Cayin PLUS MT-35 MK2 Manuel - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Cayin PLUS MT-35 MK2. Cayin PLUS MT-35 MK2 15 pages. Vacuum tube integrated amplifier

Imprimer la page

Turning On

Before turning on the amplifier please make sure all connections are right and power supply is stable.

Turn on the amplifier and the power LED will be on.

•

It shines and indicates that the amplifier is working.

If the LED is not on please contact with our local

•

agent or our company.

• Select the right audio source channel, adjust the volume

to a certain position and then you can enjoy themusic

you prefer.

S m a l l T i p s

Read the Manual

—— Please read the user's manual carefully before installation and operation.

Keep the Manual

——Please keep the manual for future reference.

Warning Signs

——Don't tear off or rub off the serial number.

Operation

——Do the operations as you are instructed in the Manual.

—— If you are going to use parts not supplied by our company like power cord, fuses etc please

Parts

make sure that parts you used are compatible with the safety requirements. Or it will cause fire or electric

shock.

——Put the amplifier on a level place. Make sure that it doesn't bring damage to the children,

Placement

adults and the amplifier itself.

——Please make sure the local voltage is the same level as indicated on the rear panel.

Power

——If the power socket is overloaded with other equipment, it will cause fire or electric shock.

Overload

——Do not open the product and change the components inside yourself. Opening

Warranty Service

the cover may expose you to dangerous voltage or other hazards. The warranty doesn't extend to any

product that has been opened by you without permission of our company.

Troubleshooting

——If any problems when you are using the product, please check according to

following tips to look for the exact reason. Please contact with our company if you can't solve the

problem.

NOTE:

1. When the audio system is under working state, don't

unplug the signal cable or speaker cables, or it will

cause damage to the amplifier and other equipments.

2. It should at least takes 2 minutes before you turn on the

power again, or it will cause damage to the vacuum

tubes.