Cayin IDAC-6 Manuel de l'utilisateur - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Cayin IDAC-6. Cayin IDAC-6 11 pages. Hi-fi audio d/a converter

Imprimer la page

Connect to Audio Source

The connection diagram illustrates how to connect the DAD to a CD player, a

computer and the iHA-6 audiophile headphone amp as a complete system.

Connect to CD player: Connect the coaxial input digital audio signal of the

DAC to the Coaxial output digital audio signal of a player with a standard

75ohm coaxial cable; or connect the optical input digital audio signal of the

DAC to the Optical output digital audio signal of a player with a Toslink

(Optical) cable, or connect the AES/EBU input digital audio signal of the DAC

to the AES/EBU output digital audio signal of a player with a standard

110ohm AES/EBU (XLR) cable.

Connect to a computer: connect the USB port of the DAC to the USB port of

a computer with a USB cable (provided in the product package)

Connect to headphone amplifier: Use XLR audio cable to connect the

balanced audio output of the DAC to the balanced audio input of the iHA-6,

or use RCA audio cable to connect the single-ended audio output of the DAC

to the single-ended audio input of the iHA-6, please make sure the left and

right channel is connected correctly.

Attention:

 Please make sure that the AC Voltage Selector has been set correctly for your

local power supply voltage

 Please turn off al equipment when you connect the audio signal cables, this will

avoided pulse or high magnitude noise from headphone amplifier and causing

damage to associated equipment.

 The vacuum tubes takes 15 seconds to warm up to desirable working condition,

the DAC will be muted during this period of time and there will not be any audio

signal output from the DAC

Install Driver

If you plan to use iDAC-6 with a window-based computer, you need to install a

USB Audio Driver in your computer before you can use the DAC as an outboard

USB sound card for your system. You can install the driver from the following url:

http://en.cayin.cn/html/down/qdxz

The steps to install the drivers are as follows:

(1) Connect the DAC to the computer with a USB cable

(2) Turn on the DAC by press the Power ON/OFF button on the front panel

(3) Double click the "

all warning until the installation process is completed.

(4) If the driver has installed successfully, you should be able to see the name

"Cayin iDAC-6) at the Device Manager interface of your computer, or

sometimes the device name will be displayed as "XMOS XS1"

" icon to activate the driver installation process, skip