DataLocker Sentry K300 Manuel du réviseur - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel du réviseur pour {nom_de_la_catégorie} DataLocker Sentry K300. DataLocker Sentry K300 10 pages. Encrypted keypad mssd with oled screen
Également pour DataLocker Sentry K300 : Manuel de l'utilisateur (19 pages), Manuel de déploiement (10 pages)

Imprimer la page

General Suggestions and Performance Testing

The Sentry K300's main security feature is hardware encryption with a 256-bit AES hardware

module in XTS mode. Since the encryption is performed at the hardware level, you cannot

"test" this feature without breaking open the device and extracting the memory to see it's

encrypted contents. The Sentry K300 is tamper evident and cannot be used again once

opened. Therefore, device performance and menu feature testing is the general suggestion for

evaluating the Sentry K300.

Note: Not all USB 3.0 ports can provide the full speed requirements needed for the Sentry

K300. For best results, please use a modern system with direct full-bandwidth ports.

Best Practices:

● Remove the device from the computer before using the keypad to prevent USB damage.

● The device must be completely dry before connecting to a computer.

● Only connect the device to certified USB ports.

● Safely eject the device from the operating system before removing it.

● Use a strong password and be sure to remember it.

Warning: A lost or forgotten administrator password cannot be reset or recovered without losing

all the stored data.

Hint: When changing the password, "Confirm Password" means enter the password again.

Pressing enter on the "Confirm Password" screen will give you an "Incorrect Password" error

and you will need to reenter the password again and once more after that.

Hardware Reset: If the device becomes nonfunctional for any reason,

use the hardware reset button - located between the four corners of

eight (8), nine (9), power/backspace, and enter. Press button lightly

with a dull pin tip to perform a hardware reset. This will reboot the

drive if it becomes unresponsive. Note: Do not press this button with a

sharp object at the risk of puncturing the button.

The full user manual can be found online at datalocker.com/k300/manual