Cayken KCY-35QE Instructions d'utilisation - Page 3
Parcourez en ligne ou téléchargez le pdf Instructions d'utilisation pour {nom_de_la_catégorie} Cayken KCY-35QE. Cayken KCY-35QE 12 pages.
Imprimer la page
Operation Manual
WARNING
Danger can occur when working with this machine due to improper
handling and/or poor maintenance, which may lead to the destruction of
the device and to severe physical injuries.
Observe all safety instructions of this operating manual and contact our
Service Team if you have any questions.
THANKS TO THE BUYER
Dear customer, Thank you for purchasing
sure to read these operation instructions closely before using your
device for the first time and keep them for later reference.
ABOUT THIS MANUAL
The machine model of the description in this manual:
KCY: 35QE
50/2QE
80/3QE
Confirm the machine model according to the nameplate.
product. Be
Full Auto Magnetic Drill
1
DESCRIPTIONS OF PRODUCTS
1. This machine is a full automatic magnetic drill machine (auto cutting and auto
return after cutting), destined to cut material with magnetisable surface with
core cutters and twist drills in sheltered environment for commercial use in
industr y and craft. The device is suitable for drilling vertical, horizontal.
CAUTIONS
1.Activate the magnet on metallic, ferromagnetic materials
2.Use the whole magnetic surface for working
3.Work on plane surfaces
4.Clean the magnetic surface and keep it clear of dirt, swarf and welding sputter
5.Set the core drilling machine down gently to prevent damage to the magnetic surface
6. Secure the drill with a safety belt when drilling on walls or ceilings
7.Check connection cables for damage
8.Make sure the mains voltage matches the machine
9.Follow the instructions in these operation instructions
10. Familiarise new users with the safe use of the machine
11.Wear safety goggles and ear protection during work
12.Use safety guard if supplied
13.Observe local, country-specific guidelines
14.Store in a dry place
Do not;
1.Work on round or curved objects
2.Drill several work pieces on top of one another
3.Modify the core drilling machine or remove signs
4.Use the core drilling machine when damaged or when parts are missing
5.Strain or damage the underside of the magnet through heavy impact or blows
6.Use the core drilling machine without having been properly instructed
7.Operate the machine without having read and understood the complete operating manual
8.Use the core drilling machine to support, lift or transport persons or loads
9.Carry out electric welding work on the work piece at the same time as using the core drilling
machine
10.Store or operate the core drilling machine at temperatures above 50°C
11.Leave the machine hanging unsupervised
12.Allow the machine to come into contact with corrosive materials
2