Dust Free 250 SERIES Manuel d'installation et d'entretien - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'entretien pour {nom_de_la_catégorie} Dust Free 250 SERIES. Dust Free 250 SERIES 7 pages.

Imprimer la page
OPERATING CONTROL SYSTEM
OPERATING FAN/ON/OFF SWITCH
To turn the Series 350 on rotate the fan control clockwise to low, medium or high setting,
depending on the amount of air flow desired. The Series 250 has a continuous variable speed
control. When the unit is on the red indicator light, located above the fan control will light up. To
turn the unit off, rotate fan control counterclockwise to off position. The red indicator light will go
off.
OPERATING THE TRICKLE SWITCH
The trickle switch is intended to be used when a steady, slow flow of ozone is desired. This
should be used in place of the standard timed, regulated ozone cycle. To operate, simply push
the trickle switch to the on position.
OPERATING THE MINUTES CONTROL/TIMER SWITCH
When a timed ozone cycle is desired rotate the minutes control and line up the white line on the
knob to the desired time allotment. Push the timer switch to the on position. The unit will now
begin generating ozone for the amount of time indicated.
OPERATING THE O AMOUNT CONTROL
To adjust the amount of ozone being generated during the timed cycle, rotate the O amount
control to the desired position, hi, low or off. No ozone will be generated when this control is set
to the off position, unless the alternate trickle method is being employed. If you can detect the
odor of O (ozone) the concentration level is too high. Reduce the O output or turn off the
3
generator.
Control System Panel
Red Indicator
Light
3
(Optional EON-equipped model shown.)
OFF
TRICKLE
HI
MED
LO
OFF
OFF
FAN
(Only on EON-equipped models)
(Only on EON-equipped models)
ON
MINUTES
30
ON
TIMER
1
(Only on EON-equipped models)
3
3
HI
OFF
LO
60
O AMOUNT
3
5