elsner elektronik KNX RW Series Spécifications techniques et instructions d'installation - Page 8
Parcourez en ligne ou téléchargez le pdf Spécifications techniques et instructions d'installation pour {nom_de_la_catégorie} elsner elektronik KNX RW Series. elsner elektronik KNX RW Series 11 pages. Rain/wind sensor
Imprimer la page
2.3.4. PCB Layout
230 V AC version
1
Rain/Wind Sensor KNX RW • Status: 19.08.2013 • Technical changes reserved. Errors reserved.
8
2
3
Installation and commissioning
Fig. 11
1) Cable connection to the rain
sensor in the housing cover
2) Opening for the cable for the
voltage supply
3) Tension clamp for voltage
supply (230 V AC), suitable for
massive conductors of up to
4
1.5 mm² or conductors with
fine wires
4) Slot for KNX clamp +/-
5
5
Opening for the bus cable
6) Programming pushbutton for
the teach-in of the device
7) Programming LED
6
7