Dustbane Gladiator 712 + Rider Manuel d'utilisation - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Dustbane Gladiator 712 + Rider. Dustbane Gladiator 712 + Rider 19 pages. Gladiator series

Imprimer la page

The machine has the follow controls and indicator lights:

• On/OFF switch (fig. C, ref. 1): turns the machine on and off

• Suction button (fig. C, ref. 2): enables/disables the suction function.

• Filter shaker button (fig. C, ref. 4): enables the filter shaker.

• Battery charge LED (fig. C, ref. 5): 3 LEDs indicating the battery charge:

• green light battery fully charged

• yellow light battery almost flat, recharge

• red light battery flat

• Suction LED (fig. C, ref. 9): indicates the suction status ON/OFF

• Center brush pressure regulation handle (ref. 8): regulates the pressure of the brush on the floor.

• Drive knob (ref. 9): enables the drive of the machine.

• Front flap raising knob (ref. 10): raises the front flap to collect bulky debris.

• Side brush lifting lever (ref. 11): raises and lowers the side brush.

• Brake (ref. 12): parking brake

6.3. Fitting the side brush

This operation must be performed with the machine off and key removed

Important

Proceed as follows:

1. Lift the front of the machine

2. Fit the brush and fix it in place with the washer and screw provided (ref. 1).

3. Unscrew the two screws (ref. 1), adjust the height of the brush and tighten the screws again.