CB ELECTRONICS TMC-1 Manuel de configuration - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} CB ELECTRONICS TMC-1. CB ELECTRONICS TMC-1 14 pages. Connecting with yamaha mmp1
Également pour CB ELECTRONICS TMC-1 : Manuel de l'utilisateur (10 pages)

Imprimer la page

TMC-1 IP address

The TMC-1 IP address can be set using the TMC-1 setup software. For details, see "To set

TMC-1 IP address" on page 12.

After assigning the IP address, check the IP address on the Discovery page.

Precautions for a system with a Dante network

Since the TMC-1 has a Fast Ethernet port, turn on the IGMP snooping and querier settings of

the network switch in a system that runs together with a Dante network.

See the user guide of the network switch for details.

Changing the TMC-1 Settings

You can change the TMC-1 settings using the TMC-1 setup software.

This section explains how to connect the TMC-1 to the software and how to change the settings

of the TMC-1 functions.

To connect TMC-1 to TMC-1 setup software.

1. Download TMC-1 setup software from the following website.

https://www.cbelectronics.co.uk/tmc1

Make sure that the computer is connected to the TMC-1 via a USB cable, and then

start the TMC-1 setup software.

Select the [Connect] tab, and then click the [View Coms] button.

Select "0:TMC-1-XXXX" for both MIDI Input and Output in the Select Midi Input and

Output Ports window.

After that, click the [Hide] button to close the window.