CB Tech WaterBox Manuel d'utilisation - Page 16

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} CB Tech WaterBox. CB Tech WaterBox 20 pages. Mobile water filtration system

Imprimer la page

Filter Replacement Interval

CB Tech Nanomesh™ Stage I Filter:

The working life of the Stage I filter in the CB Tech WaterBox™ depends upon the

amount of total organic carbon (TOC) and suspended solids in the source water. The

Stage I filters should be changed when the system pressure gauge decreases by 10 psi

below the initial starting pressure. Therefore, it is important to make a note of the initial

pressure reading on the system pressure gauge. A typical initial pressure reading should

be in the range of 35-50 psi.

Because the first Stage I filter sees the highest particulate and TOC loads, the

procedure for replacing filters is:

1. Remove and discard the first Stage I filter,

2. Move the second Stage I filter to the first position,

3. Install a new Stage I filter in the second position.

Page 16 of 20