CB2 intimo Instructions de montage - Page 3
Parcourez en ligne ou téléchargez le pdf Instructions de montage pour {nom_de_la_catégorie} CB2 intimo. CB2 intimo 3 pages. Secretary desk
Imprimer la page
intimo
SECRETARY
NOTE: Do not
over tighten
the bolts
top
shelf
C
A
A. Fit top shelf and back panel into corresponding
slots of left side panel.
B. Fit dowels of crossbar into left side panel.
C. Secure desk assembly and crossbar with 4
small bolts, 4 spring washers, 4 flat washers
and 4 brackets as shown. Secure, but do not over
5
tighten, bolts with an allen wrench.
Open door and secure hinges with 2 small
screws per hinge. Secure, but do not over
7
tighten, screws with a phillips head screwdriver.
Made in Vietnam - r06
back
panel
crossbar
C
B
door
NOTE: Do not
over tighten
the screws
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
door
Fit right side panel onto corresponding dowels
of assembly and hinge of door. Secure desk
assembly and crossbar with 4 small bolts, 4
spring washers, 4 flat washers and 4 brackets
6
as shown.
NOTE: Make sure arrow
on each cam points toward
nearest edge with holes
large
cover
A. Carefully position unit upright. Insert 4 cams
into left and right side panels. Fit top panel
onto corresponding dowels of assembly and
secure cams.
B. Place small and large covers into assembly as
8
shown. Assembly is now complete.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners.
right side
panel
A
top
panel
B
small
cover
Page 3 of 3