CB2 LINEAR Instructions de montage - Page 2
Parcourez en ligne ou téléchargez le pdf Instructions de montage pour {nom_de_la_catégorie} CB2 LINEAR. CB2 LINEAR 5 pages. Tall chest
Également pour CB2 LINEAR : Instructions de montage (4 pages), Manuel d'instructions de montage (11 pages)
Imprimer la page
linear
LOW DRESSER
NOTE: Do not over
tighten the bolts.
right side
panel
top panel
With the assistance of another adult, carefully
place top panel upside down onto a clean,
padded surface. Fit pre-assembled dowels of left
and right side panels into corresponding holes of
top panel. Secure left and right side panels to top
panel with 2 flat washers, 2 spring washers and
2 large bolts as shown. Secure, but do not over
1
tighten bolts using a phillips head screwdriver.
Slide back panel into grooves of left and right
3
side panels.
Made in Vietnam - r05
NOTE: Make sure left
and right side panels are
assembled with grooves
facing back as shown
left side
panel
back panel
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Fit pre-assembled dowels of partition into
corresponding holes of top panel. Secure partition
to top panel with 2 flat washers, 2 spring
washers and 2 large bolts as shown, using a
2
screwdriver.
bottom panel
Carefully place bottom panel onto a clean,
padded surface. Attach 5 legs to bottom panel
with 4 small bolts as shown. Secure, but do not
4
over tighten the bolts using an allen wrench.
partition
Page 2 of 5