CBC HSW-H30 Manuel d'installation et d'utilisation - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} CBC HSW-H30. CBC HSW-H30 14 pages. Height strip camera

Imprimer la page
Section
Menu Item
Motion Cont'd
Hold Time
Alarm
Privacy
Mask1
Masking
...
Mask8
Setup (SET)
Title
Manual DPC
Auto DPC
OLPF
OSD Color
System
Camera ID
Communication
Language
Exit
Factory Set
Save and Exit
Exit
Sub-Menu
Default
Item
-
003
-
On
Dot SEL
-
Dot XY
-
Move XY
-
Color Set
Black
(On)
Off
(Manual)
Off
(Auto)
Off
-
650
-
Blue
-
1
(ON)
Off
-
English
-
Off
-
-
-
-
Selection
Description
0 ~ 100
n/a
This unit is not equipped with the Alarm
output feature. Setting this to on/off has
no effect.
L_Top
Up to 8 separate privacy masks can be
L_Bot
utilized. Each mask is turned on and
R_Bot
configured in the PVM (Privacy Masking)
R_Top
menu. Set the mask to "On" and press
the button to configure it. A black box
-
will appear on the image. Each corner of
-
the box (Dot SEL) can be individually
Black
controlled to increase/change the size
White
and shape of the box (Dot XY). Once the
Red
size and shape are configured, the mask
Green
can be moved (Move XY) while retaining
Blue
the shape. The color of the mask can
Magenta
then be set (Color Set).
Cyan
Off
A title for the camera (i.e. Loading Dock)
On
can be created that will be overlaid on the
video. Turn the Title to "On" and press
the button to enter the title.
Off
DPC (Dead Pixel Compensation) allows
Manual
the DSP to compensate for dead pixels by
using information from the surrounding
Off
pixels. The DSP is able to reduce or
Auto
eliminate pixels that have ceased
functioning.
650
The Optical Low Pass Filter (OLPF) feature
850
helps reduce the Moire effect of analog
cameras.
Black, White
Adjust the color of the highlighted setting
Red, Green
in the OSD menu.
Blue, Cyan
Magenta
0 ~ 255
Se the Camera ID if using RS485
communication for OSD control (not
enabled for this unit).
Off
Configure the communications protocoal
On
and baud rate for this camera (not
enabled for this unit)
English
Select the desired language, then
...
highlight Save & Exit and press the button
(Multiple)
to save the language settings.
Off
To reset the camera to factory defaults,
On
highlight "On" and press the button.
-
Highlight Save and Exit, then press the
button to save changes.
-
Highlight Exit then press the button to
exit without saving.
100 0284 002 CBC ADD1 4/2012
Printed in the U.S.A.