CBE DS-520AN Manuel d'instruction - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} CBE DS-520AN. CBE DS-520AN 13 pages.

FUNCTIONS

TEMPERATURE

- Internal and external temperatures are measured through sensors which are placed inside and

outside of the vehicle.

- The measuring precision is ± 1°C.

CLOCK

When the panel is switched on, the time gets displayed; after every test-function the time gets

displayed again.

In order to set the clock, keep pushing for 2 secs the test button ref. 1 while the time gets displayed.

The hours' digits start blinking and by pushing the test buttons ref. 2 e ref. 3 they can be modified

By pushing the test button ref. 1 again, it is possible to start setting the minutes' digits.

By pushing the test button ref. 1 for the third time, the clock setting is confirmed.

SETUP

To enter the programmation menu turn on the control panel with the switch ref. 5 while keeping

pushed the buttons ref. 2 and 3.

The progammation is sequential: to shift to the next parameter push the button ref. 1.

1. Voltmeter B1. With the buttons ref. 2 and 3 one can modify the displayed value in 0,2V steps

2. Voltmeter B2. With the buttons ref. 2 and 3 one can modify the displayed value in 0,1V steps

3. Amperemeter B2. With the buttons ref. 2 and 3 one can modify the displayed value in 0,5A steps

4. Internal temperature. With the buttons ref. 2 and 3 one can modify the displayed value in 0,5°C

steps

5. External temperature. With the buttons ref. 2 and 3 one can modify the displayed value in 0,5°C

steps

Pushing again the button ref. 1 you exit the programmation menu.

TANKS SETTING

NB: do not modify the dip-switches' position of the picture.