Datalogic Memor X3 Manuel de démarrage rapide - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Datalogic Memor X3. Datalogic Memor X3 2 pages. Single ethernet dock
Également pour Datalogic Memor X3 : Manuel de démarrage rapide (2 pages), Instructions (2 pages), Manuel de dépannage (10 pages), Manuel de démarrage rapide (2 pages)
Imprimer la page
INSTALLING A MICROSD CARD
1.
Turn off the Memor X3.
2.
Push the latch release button and pull the latch down (see
section GETTING STARTED); then remove the cover and
the battery pack:
3.
Open the microSD card slot by lifting up the locking plate:
4.
Shift the cardholder upwards and then pull it up:
5.
Insert the microSD card with the written part upward:
6.
Lock the card into place by pushing the cardholder down
and then shifting it downwards; push the locking plate
down:
7.
Reinsert the battery cover (see section GETTING
STARTED).
SCANNING AND IMAGING
Laser Data Capture
2D Imager Data Capture
Linear barcode
2D Matrix symbol
ÌBX3ÉÎ
Relative Size and Location of Aiming System Pattern
Linear Imager Data Capture
Scanning with a Memor X3 Linear Imager
When beams reflect directly back into the scanner from the bar code,
they can "blind" the scanner and make decoding difficult.
To avoid this, don't keep the terminal perpendicular to the barcode:
moving it of a small angle of ±2° is usually enough to enable proper
reading. But don't scan at too oblique an angle either: keep the scanner
within an angle of ±30° from the perpendicular to the barcode in order to
guarantee effective scanning.
Side Views
Specular reflection.
Light
Light
Reflected beam
Source
Source
is within specular
dead zone and
prevents decode.
Tilt Bar Code At Slight Angle (Up to 30°)
REFERENCE DOCUMENTATION
For further information regarding Memor X3 refer to the SDK Help on-
line and to the Memor X3 User's Manual.
For information regarding safety and regulatory refer to the Safety and
Regulatory Addendum or to the dedicated section of the Memor X3
User's Manual.
SERVICE AND SUPPORT
Datalogic provides several services as well as technical support
through its website.
Please check our website at
www.datalogic.com
Services", then "Automatic Data Capture", and click on the links
indicated for further information including:
-
Downloads
-
Manuals for the latest versions of user manuals and product
guides.
-
Software & Utilities for the latest firmware release for your
product. You can also click on the following link for direct
access
to
www.datalogic.com/products_updates.
-
Service Program for warranty extensions and maintenance
agreements.
-
Repair Centers for a list of authorised repair centers.
-
Technical Support Automatic Data Capture email form to
contact our technical support
WARRANTY TERMS AND CONDITIONS
The warranty period is 1 year for the device and 90 days for
consumables (e.g. battery, power supply, cable etc.) from date of
purchase at our company.
No specular
reflection.
Decode can
occur.
©2013-2014 Datalogic ADC S.r.l. • ALL RIGHTS RESERVED. •
Protected to the fullest extent under U.S. and international laws. •
Copying, or altering of this document is prohibited without express
written consent from Datalogic ADC S.r.l.
Datalogic and the Datalogic logo are registered trademarks of
Datalogic S.p.A. in many countries, including the U.S.A. and the E.U.
Memor and the Memor logo are trademarks of Datalogic ADC S.r.l.
All other brand and product names mentioned herein are for
identification purposes only and may be trademarks or registered
trademarks of their respective owners.
under "Support &
this
section: