Datalogic Memor X3 Manuel de démarrage rapide - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Datalogic Memor X3. Datalogic Memor X3 2 pages. Single ethernet dock
Également pour Datalogic Memor X3 : Manuel de démarrage rapide (2 pages), Instructions (2 pages), Manuel de dépannage (10 pages), Manuel de démarrage rapide (2 pages)
Imprimer la page
Communications
The Memor X3-HC single slot dock can be connected to a host by means of a USB interface or an RS232
interface.
USB Connection
The Memor X3-HC single slot dock can be connected to the host by means of any standard mini USB cable.
1.
Connect power to the dock. Use country specific power cord. Refer to the Datalogic website.
2.
Plug the USB cable into the USB port on the back of the dock.
3.
Connect the other end of the USB cable to the USB port of the host device.
4.
Insert the Memor X3-HC into the dock.
Host PC
*.
Included in the box.
**.
Only necessary for battery charging. Recommended power supply: 94ACC1324 PG5-30P35 AC/DC POWER SUP-
PLY EU/USA PLUG.
RS232 Connection
The Memor X3-HC single slot dock can be connected to the host by means of any standard null modem
cable. The 9-pin female D-Sub connector must be connected to the RS232 port of the dock.
1.
Connect power to the dock. Use country specific power cord. Refer to the Datalogic website.
2.
Plug the
null modem
cable into the
RS232
3.
Connect the other end of the
null modem
4.
Insert the Memor X3-HC into the dock.
Host PC
*.
I.e. 94A051020 CAB-427.
**.
Only necessary for battery charging. Recommended power supply: 94ACC1324 PG5-30P35 AC/DC POWER SUP-
PLY EU/USA PLUG.
Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many coun-
tries, including the U.S.A. and the E.U.. Memor is a trademark of Datalogic S.p.A. and/or its affil-
iates. All other brand and product names may be trademarks of their respective owner.
Memor X3-HC
Std Mini USB*
Single Slot Dock
Power Supply**
port on the back of the dock.
cable to the
RS232
port of the host device.
Memor X3-HC
Null modem cable
Single Slot Dock
Power Supply**
www.datalogic.com
Technical Specifications
Mechanical Features
Dimensions
105 X 75 X 80 mm (4.13 X 2.95 X 3.15 in)
Weight
256 g (9.03 oz)
Electrical Features
*
Power Supply
From 5 VDC ± 5%
Consumption
Max. 2.5 A
Indicators
Power on LED (green); spare battery charge LED (bicolored)
Charge Time
• 1100 mAh Battery: max. 2 hours spare battery only; max. 3 hours with terminal and
spare battery.
• 2000 mAh Battery: max. 4 hours spare battery only; max. 6 hours with terminal and
spare battery.
• 1430 mAh Battery: max. 3 hours spare battery only; max. 4 hours with terminal and
spare battery.
• 2300 mAh Battery: max. 5,5 hours spare battery only; max. 7,5 hours with terminal
and spare battery.
Communication Features
Interface
RS232, USB 1.1 version
Baud Rate
RS232 = up to 115200 b/sec; USB = up to 12 Mb/sec
Environmental Features
**
Working Temperature
0° to +50 °C (+32° to +122 °F)
Storage Temperature
-20° to +65 °C (-4° to +149 °F)
Humidity
80% non condensing
Degree of Protection
IP50
*.
Recommended power supply: 94ACC1324 PG5-30P35 AC/DC POWER SUPPLY EU/USA PLUG.
**.
Battery must be charged at a temperature ranging from 0° to +36 °C (+32° to +97 °F).
Compliance
FCC Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
Industry Canada (ICES-003) Compliance
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
822002490
(Rev. A)
June 2016