ADE GW400-15 Manuel d'utilisation - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} ADE GW400-15. ADE GW400-15 16 pages. Electronic compact scales

Imprimer la page

Error messages

Failure

Current weight exceeds the zero

ERR 4

range of the scale

ERR 5

Keypad fault.

Load cell is defective or not

ERR 6

connected.

Weighing result unstable due to

draughts, air movement or

Err 9

vibrations.

Load cell is defective.

Current weight exceeds the

Err 19

permissible range for automatic

zeroing when switched on.

Zero range or weighing capacity

--oL--

exceeded

-- UL --

Underload (-20d)

Storage and transport conditions

Keep all original packaging materials for a possible return of the scale to avoid damage in

transit. Disconnect all cables before transport and switch off the scale to avoid damage.

Disposal

Waste electrical equipment does not belong in household waste.

Devices with this marking may not be disposed of as residual waste

but must be recycled.

Remove (if possible) all batteries and rechargeable batteries from the

devices and send them to the battery disposal.

Make sure that only depleted batteries or batteries with insulated poles

are disposed of so that there is no short circuit!

Warranty

ADE will repair or replace this product if evidence is provided that it has failed within 1 year from

the date of sale (proof of purchase is required) due to lack of workmanship or defective material.

All moving parts, such as batteries, cables, etc., are excluded.

The use of accessories other than those approved by ADE, especially batteries, will void the

warranty.

This warranty does not cover external normal wear and tear or damage caused by accident or

misuse. The warranty will not apply for devices that have been opened by unauthorised persons.

The statutory rights of the customer are not affected by this agreement in any way.

The dealer from whom the scale was purchased is responsible for complaints, customer service

and spare parts.

GW400-210408-Rev004-UM-en

Cause

Measure

Unload the weighing surface and try

again.

If necessary, restart the scale.

Please contact your service partner.

Avoid draughts, air movement and

vibrations.

Please contact your service partner.

Unload the weighing surface and

then restart the scale if necessary.

Unload the scale.

Switch the scale off and on again.