ADE GW400-15 Manuel d'utilisation - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} ADE GW400-15. ADE GW400-15 16 pages. Electronic compact scales
Imprimer la page
Zeroing
Press the
key when the scale shows a weight, even though the weighing surface is
completely empty. The display of the scale shows 0.00 again.
The zero position is indicated by the symbol >0< on the display.
Taring
With this function, the user can weigh objects together with other items (such as containers, film
or paper towels), without the weight of those items affecting the weighing result.
Switch on the scale.
Place an empty container on the scale and press the
arrow indicates the net weight mode with NET icon. As soon as you place the item to be
weighed in the container, only the net weight of the item to be weighed is displayed.
Now carry out any number of weighing operations. When the tared container is on the weighing
surface, the display shows only the net weighing results.
If you remove the tared container with the items to be weighted from the weighing surface, the
tare weight will be displayed as a negative value.
Pressing the
key after unloading the weighing surface clears the tare weight.
If the display is not stable, the arrow will not light up on the stability indicator ~.
Backlight setting
Scale display backlight can be enabled and disabled manually by the user. With the backlight
activated, the weighing results are more clearly visible on the display, but the battery is discharged
faster.
The scale has three different backlight setting options:
OFF (bk oF):
The backlight is switched off permanently.
ON (bk on):
The backlight is switched on permanently.
AUTO (bk AU):
The backlight switches on automatically when the weighing surface is
loaded or after pressing a key; or switches off again after a short period
without moving weight or pressing a key.
To set the backlight, please proceed as described below:
When in weighing mode, press and hold down the
current setting is displayed. Press the
selection with the
When the scale is switched off, the last settings done are saved.
8
9. Backlight and parameter settings
key.
key. The display shows "0" and the
key for approx. 2 seconds until the
key again to change the setting. Confirm your
GW400-210408-Rev004-UM-en