CBT Supply flipIT RIMLESS Manuel d'instructions de montage - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions de montage pour {nom_de_la_catégorie} CBT Supply flipIT RIMLESS. CBT Supply flipIT RIMLESS 12 pages. Convertible computer workstation

Imprimer la page

Almost done.

Everything is complete, except for install-

ing the LCD monitor, CPu, modesty panel

and doing the wire management.

once the LCD monitor is installed, the lid

will need to be adjusted flush with the

top.

Turn the table on its feet to complete the

installation.

Install the monitor

Make lid flush

use a straight edge as a reference. use the

weight of the monitor to make the front rest

adjustment first.

use the 4 screws provided with your monitor to install the VESa

mount. The VESa mount captures the bracket and gravity does the

rest. a spring-loaded pin holds the monitor in place at every angle.

Close the lid CaREFuLLy, because the gas spring is not connected.

now its time to fine tune the flipIT Lid.

Monitor weight may compress the pad,

causing the lid to sink in.

Use 3/8" open end wrench and 5/32" hex key to loosen,

adjust and re-tighten the rest.

FIK19R Rimless flipIT ® by SMaRTdesks®

www.smartdesks.com

800-770-7042