ADE KE 1138 Mode d'emploi - Page 2

Parcourez en ligne ou téléchargez le pdf Mode d'emploi pour {nom_de_la_catégorie} ADE KE 1138. ADE KE 1138 2 pages.

Imprimer la page

Thank you for purchasing this high-quality product made by ADE. You have acquired a

set of scales that meet the highest technical standards and are of proven quality.

Please read these operating instructions carefully before using the product for the first

time and keep them in a safe place where you can find them whenever you need the

information contained in the instructions.

1. Putting into Service

Inserting the batteries:

Open the lid of the battery compartment on the bottom of the scales and insert the three

supplied 1.5 V AAA batteries. Please observe the correct polarity of the batteries (+/-).

Safety information:

Ensure that no objects fall onto the scales; otherwise, the scales

may be damaged.

Only use a damp cloth to clean the scales. Never use solvents

or abrasive cleaners. Do not put the scales under water. You

must clean all the plastic parts of the scales immediately after

they come into contact with grease, spices, vinegar or any other

strongly spiced or coloured foods. Avoid any contact with citric

acid.

2. Operation

Switch ing on the scales:

Place the scales on a firm, level base. The scales are equipped with highly sensitive

touch buttons. To switch-on the scales touch the

stabilised, they display "0 g" / "0.0 oz" / "0 ml" or "0.0 fl.oz", depending on the setting.

The scales are now ready to weigh.

Note: Display the scales a value after power-on, touch the

scales back to "0 g".

Units of weight:

Turning the knob (in weighing mode) allows you to change country-specific units of

weight (g = grams / oz = ounces / ml = millilitres / fl.oz = fluid ounces). Please ensure

that the scales are set to the appropriate units of weight for you.

Tare func tion:

Touching the

/Tare-button allows you to set the scales to "0 g". Place a bowl, for

example, on the platform of the scales, touch the

/Tare-button. After the scales have

/Tare-button to set the

/Tare-button and in this way set the

scales back to "0 g" (is the weight to be tared heavier than 600 g appears bottom left of

the display the TARE-icon). You can repeat this procedure as often as you like until the

total capacity of the scales (5 kg) has been reached. After you remove the item(s) to be

weighed, the total weight is displayed as a minus value.

Automatic- / manua l switch-off the scale:

If the indicated weight does not change within approx. 10 seconds, the backlight of the

scale switches-off automatically. If the indicated weight does not change within approx.

50 seconds, the scales will automatically switch-off. You can switch-off the scales

manually after you have finished using them by touching the

approximately two seconds.

3. Timer

Set-up timer:

Push the knob to switch-on the scales and to enter the timer mode. The display indicates

"Timer 00:00". When you used the timer-function once before the previous time-input

appears. Pushing the knob for approx. 2 seconds allows you to set the time indicating

back to "00:00". Now you can turn the knob to set the desired time. By turning up

(clockwise) the seconds; by turning down (counter clockwise) the minutes. After entering

the desired time, push again the knob to confirm the input. The timer runs and after expiry

of time a loud peep-tone sounds for about 60 seconds. Stop the beep by touching the

/Tare-button or push the knob. During expiration, the timer-function can anytime be

stopped and/or required to operate by pushing the knob.

Note: If, within about 10 seconds before the start of the timer, no further action takes

place, the backlight of the scales switches-off automatically and after approx. 20 seconds,

the scales will automatically switch-off.

Switch between timer- an d weighing mode:

If the scales are in weighing mode, push the knob to enter the timer mode. The weighing

function is closed.

If the scales are in timer mode, touch the

the timer was previously activated, the timer function runs unto the expiry of time,

except the function has been stopped by touching the

seconds and the scales is thereby off.

4. Error Messages

"Lo"

Indication that the battery is flat – Please replace the batteries with

three 1.5 V type AAA.

"EEEE"

Overload display – The 5 kg maximum capacity of the scales has been

exceeded. Immediately remove the load from the scales; otherwise, the

load cell could be damaged.

/Tare-button for

/Tare-button to enter the weighing mode. If

/Tare-button for approx. 2