ADE KE 1210 Manuel d'utilisation - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} ADE KE 1210. ADE KE 1210 12 pages. Model mia

Imprimer la page

Thank you for purchasing this high-quality product made by ADE. You have acquired a

set of scales that meet the highest technical standards and are of proven quality.

Please read these operating instructions carefully before using the product for the first

time and keep them in a safe place where you can find them whenever you need the

information contained in the instructions.

1. Putting into Service

Inserting the batteries:

Open the lid of the battery compartment on the bottom of the scales and insert the three

supplied 1.5 V AAA batteries. Please observe the correct polarity of the batteries (+/-).

Safety information:

Ensure that no objects fall onto the scales; otherwise, the scales

may be damaged.

Only use a damp cloth to clean the scales. Never use solvents

or abrasive cleaners. Do not put the scales under water. You

must clean all the plastic parts of the scales immediately after

they come into contact with grease, spices, vinegar or any other

strongly spiced or coloured foods. Avoid any contact with citric

acid.

2. Operation

Switch ing on the scales:

Place the scales on a firm, level base. To switch-on the scales firmly press the weighing

platform, with a pressure of at least 500 g. After the scales have stabilised, they display

"0 g" / "0.0 oz" / "0 ml" or "0.0 fl.oz", depending on the setting. The scales are now

ready to weigh. Place the object to be weighed always concentric on the scales to

achieve an accurate weighing result.

Note: Display the scales a value after power-on, touch the tare-button to set the scales

back to "0 g".

Units of weight:

The scales are equipped with highly sensitive touch buttons. Touching the min/unit

button (in weighing mode) allows you to change country-specific units of weight (g =

grams / oz = ounces / ml = millilitres / fl.oz = fluid ounces). Please ensure that the scales

are set to the appropriate units of weight for you.

Tare func tion:

Touching the tare-button allows you to set the scales to "0 g". Place a bowl, for example,

on the platform of the scales, touch the tare-button and in this way set the scales back

to "0 g". You can repeat this procedure as often as you like until the total capacity of the

scales (5 kg) has been reached. After you remove the item(s) to be weighed, the total

weight is displayed as a minus value.

Note: Is the weight to be tared heavier than 600 g or if the tared total weight exceeds

600 g, appears on top of the display the symbol TARE.

Automatic- / manua l switch-off the scale:

If the indicated weight does not change within approx. 20 seconds, the backlight of the

scales switches-off automatically. If the indicated weight does not change within approx.

40 seconds, the scales will automatically switch-off.

3. Timer

Set-up timer:

Press on the weighing platform to switch-on the scales. Touch the reset-button to enter

the timer mode. The display indicates on the top right the symbol

you used the timer-function once before the previous time-input appears. Touching the

reset-button for approx. 2 seconds allows you to set the time indicating back to "00:00".

Now you can touch the min/unit-button to set the desired minutes (with persistent

touching in 10th steps) and by touching the sec-button the seconds (with persistent

touching in 10th steps). After entering the desired time, touch again the reset-button to

confirm the input. The timer runs and after expiry of time a loud peep-tone sounds for

about 60 seconds. Stop the beep by touching one of the buttons. During expiration, the

timer-function can anytime be stopped and/or required to operate by touching the reset-

button.

Note: If, within about 20 seconds after the start of the timer, no further action takes place,

the backlight of the scales and after further 10 seconds, the scales will automatically

switch-off; the timer function remains activated.

Switch between timer- an d weighing mode:

If the scales are in weighing mode, touch the reset-button to enter the timer mode. The

weighing function is closed.

If the scales are in timer mode, touch the tare-button to enter the weighing mode. If the

timer was previously activated, the timer function runs unto the expiry of time, except the

function has been stopped by touching the reset-button.

4. Error Messages

"Lo"

Indication that the battery is flat – Please replace the batteries with

three 1.5 V type AAA.

"EEEE"

Overload display – The 5 kg maximum capacity of the scales has been

exceeded. Immediately remove the load from the scales; otherwise, the

load cell could be damaged.

and "00:00". When