Datamax M-Class Mark II Manuel de démarrage rapide - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Datamax M-Class Mark II. Datamax M-Class Mark II 8 pages. Rfid option
Également pour Datamax M-Class Mark II : Manuel (6 pages), Manuel (8 pages), Manuel de démarrage rapide (4 pages), Manuel (10 pages), Manuel de démarrage rapide (8 pages), Manuel de démarrage rapide (6 pages)

Calibrate the Media

RFID Calibration automatically establishes the critical tag to transducer distance and power setting for the

media. Before calibrating, ensure that the following prerequisites have been met:

•

RFID media is installed;

•

The Media Sensor is adjusted and calibrated for the installed media; and,

•

The RFID Option is enabled.



Note:

Reference the Operator's Manual for details..

Calibrate the media as follows:

1) With the printer at READY simultaneously press FEED and TEST.

2) Answer the displayed PERFORM CALIBRATION? prompt by pressing ENTER to accept (or ESC to

abort). If accepted, CALIBRATING RFID will be displayed as media is advanced to establish the

tag location and power requirement. (Wait briefly for both processes to complete.)

3) When complete, a brief outcome message may appear as the database settings are updated and

the media is retracted to the top of form position.

Begin Use (RFID Programming Modes)

The printer features two different operational modes for tag programming:

•

Direct Mode allows user (Host) control of RFID reading and writing, where each tag is individually

processed with status and data responses.

•

Label Formatting Mode uses the printer configuration to process all RFID read, write, and

exceptions as determined by a label format, and supports automatic increment and decrement

commands for numeric, alphanumeric, or hexadecimal.



Notes: (1) Both modes auto-position to the tag location.

(2) See the Class Series 2 Programmer's Manual for detailed programming information.