Dutec BaudMaster BMUSB Manuel de l'utilisateur - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Dutec BaudMaster BMUSB. Dutec BaudMaster BMUSB 18 pages. Usb to rs-232 converter

Imprimer la page
TM
BaudMaster

System Requirements

o PC 486DX4-100MHz or higher or compatible system
o Available USB port
o CD-ROM or Internet access
®
o Windows
XP , Windows

Driver Installation

The CD-ROM included with the converter contains the following files:
• Virtual COM Port Drivers
• Version information (Readme.txt)
• BaudMaster manual
Virtual COM Port Driver Installation for Windows XP
Follow these steps in install the Windows XP VCOM driver:
1.
Insert the installation CD in your computers CD-ROM drive.
2.
Connect the USB cable between the host computer and the converter. If using a self-
powered converter turn on the input power source.
3.
Windows will open a "Found New Hardware Wizard" window.
• If Windows XP Service Pack 2 is installed the wizard will ask to connect to Windows
Update to search for drivers. Select "No, not this time"
4.
Select "Install from a list or specific location (Advanced)" and click Next.
5.
Select "Search for the best driver in these locations" and select "Search removable media
(floppy, CD-ROM...)". Click Next.
6.
Windows will locate the drivers on the installation CD and may warn you that the driver
is not verified. Click Continue Anyway.
7.
Click Finish to finish installing the "BaudMaster USB Composite Device".
8.
Windows will open a second "Found New Hardware Wizard" window.
• If Windows XP Service Pack 2 is installed the wizard will ask to connect to Windows
Update to search for drivers. Select "No, not this time"
9.
Select "Install from a list or specific location (Advanced)" and click Next.
10. Select "Search for the best driver in these locations" and select "Search removable media
(floppy, CD-ROM...)". Click Next.
11. Windows will locate the drivers on the installation CD and may warn you that the driver
is not verified. Click Continue Anyway.
12. Click Finish to finish installing the "BaudMaster USB to UART Bridge Controller".
8
8
®
® 98SE
2000 or Windows
Copyright
BMUSB RS232 User's Manual
©
2006 duTec 1–800-248-1632