DUTSCHER MagnetaPure 32 Plus Manuel de démarrage rapide

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} DUTSCHER MagnetaPure 32 Plus. DUTSCHER MagnetaPure 32 Plus 2 pages. Nucleic acid purification system

Imprimer la page

MagnetaPure 32 Plus Nucleic Acid Purification System

Quick Start Guide For MagnetaPure 32 Plus

This is a short protocol and does not replace the original manual. Carefully

read the whole manual and safety instructions prior to operation!

Remove the transport lock before switching on the device! Do NOT power

the instrument on prior to removing the transport lock.

Always ensure that the local supply voltage in the laboratory

conforms to that specified on the type label on the back of the

instrument. Do not connect from ungrounded power sockets.

1. Preparation

Remove the instrument from the packing case, Remove the tape around the cabin door, open the

door. Remove the two screws by hand as shown in the figure below and remove the red transport

fixing block to release the moving parts.

Screw

Transport fixing block

In the process of dismantling, please be careful not to collide with magnetic

rods, otherwise it will damage the magnetic rod!

Do NOT power the instrument on prior to removing the transport lock.

2. Connect the power

Connect one end of power cord to the instrument socket and the other to power (AC100~240V),

then turn on the power switch.