Dataprobe IP-2810-M Manuel - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Dataprobe IP-2810-M. Dataprobe IP-2810-M 13 pages. Dual input web controlled power switches
Imprimer la pageiP-28xx
Web Browser Operation
The switch can be accessed by any Web
Browser. To access the switch, address your
browser to the IP address set in the switch.
As shown in the screen right, this browser is
connected to switch with address
192.168.1.195. You can add switch locations
to your Bookmarks or Favorite Places and
name them as convenient. When connected,
the Password screen is displayed.
Enter the Password (no User Name is
necessary) as set in the Telnet configuration.
Remember; the password is case sensitive.
When the password is properly entered, click
OK. This brings up the Control and Status
screen:
xP-2815 Ver 1.xx
complete, the status will change.
You can Link or Unlink a pair of outlets by clicking on the Yes/No Hotlink under the Link column
Upon completion of your control session, click on logout. This will terminate the session and release the switch to the next
user. The Goodbye page will be displayed. If you close you session before logging out, you will be locked out of the unit for
two minutes. This 2 minute inactivity timer prevents an open but neglected browser from locking other users out.
This screen provides all the control and
status information required. The Name of
each outlet is displayed along with its current
status On or Off. The background will be
yellow for On and gray for Off
To change the status of any outlet, simply
click on the On/Off hotlink under the Action
column next to that circuit.
If the outlets are linked, it will be shown in
the Link column. Selecting either one of the
linked outlets will cause the other to work
simultaneously.
To Cycle (change the status for a period of
time) on any outlet or pair of linked outlets,
click on the Cycle hotlink. While cycling, the
temporary status will be displayed with a
lavender background. Once the cycle is
Page 9