Dataprobe COE-8O Installation du matériel - Page 4
Parcourez en ligne ou téléchargez le pdf Installation du matériel pour {nom_de_la_catégorie} Dataprobe COE-8O. Dataprobe COE-8O 7 pages. Contact closure over ethernet
Imprimer la pageCOE-8
Configuration
Setting I/P Address
The COE-8 units provide two methods for setting the IP Address
1) Static IP via the Web Page Setup
2) DHCP
WEB Page
Login to the COE-8 and access the Setup pages by clicking on the Setup button from the home page.
Click on the IP button to bring up the IP Settings page:
Select Static Mode from the radio buttons and fill in the IP Address, Subnet Mask and Gateway as
provided by your network administrator. Click Apply to save the changes. You will then be prompted to
reboot the COE-8. Click on the Reboot button. The COE-8 will reboot and the new IP address will be
ready to be accessed.
DHCP
Selecting DHCP from the IP Setup page allows a DHCP server to provide IP address information to the
COE-8. Click Apply and then Reboot when prompted. The COE-8 will reboot and will have to be
accessed with the IP address assigned by the DHCP server. If no IP address is assigned by a DHCP
server, the original IP address will be retained.
Page 4