AGRI-COVER Tonnosport Manuel d'instructions d'installation - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} AGRI-COVER Tonnosport. AGRI-COVER Tonnosport 17 pages. Roll-up cover

Imprimer la page

1: INSTALLING SIDE RAILS (Continued)

E. Position side rail with weather strip

against inside lip of box. Push side rail

forward until it touches front of box.

IMPORTANT: Ensure strike is positioned

at rear of box.

F. At front, adjust top of side rail until flush

with top of box and hold with assistance of

another person or a spring clamp.

G. Install first clamp as close to front of box

as possible and then use 1/2" wrench to

tighten.

IMPORTANT: To keep side rail secured

on truck, ensure clamp teeth engage

grooves on side rail, turn nut finger tight,

then use wrench to finish tightening.

H. Verify side rail is level. If side rail is not

level, perform one of the following:

If side rail tilts up: loosen and lower clamp,

engage teeth and then retighten clamp.

If side rail tilts down: loosen and raise

clamp, engage teeth and then retighten

clamp.

Top of side rail

flush with top

side of box at

front

Top of side rail flush

with top of box

Temporary

spring clamp

Strike at rear

Position

clamp

as close

to front

of box as

possible

This surface of

side rail should

be level

Adjust clamps

up or down until

they hold side

rail level when

tightened