AUS PRO CL-200E Manuel de l'utilisateur - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AUS PRO CL-200E. AUS PRO CL-200E 8 pages. Automatic money detector

Imprimer la page

Orientation to:

Center

Right edge

Left edge

Figure 5

Figure 6

Incorrect orientation of notes

Correct orientation of notes

Attention! If a banknote is placed in receiving tray incorrectly, the banknote is not

detected as an authentic one and any error code is displayed.

In case of error check banknote orientation (Fig.4) and try to place the banknote into

receiving tray once again.

When counting is over, clear the display pressing 'C' button and switch off the power. If

a banknote is jammed inside the detector, open the top cover (Fig 1-2) and remove the

banknote.

Mounting and maintenance rules

1. When choosing a mounting place for detector, avoid uneven and water-close surfaces

and dangerous objects.

2. Do not mount and so not use the detector in places where it can be affected by direct

sunlight, strong vibration and dust.

3. Use the adapter supplied with the device.

4. If the device was kept in cold for a long time, keep it for at least 6 hours without

packing at a room temperature before switching on.

5. Switch off detector when it is not used for a long time during a day.

6. Error codes and messages.

Attention! Errors may occur when verifying authentic crumpled, dilapidated, dirty,

laundered, torn, taped, decoloured banknotes or if a banknote was exposed to hostile

environment or has foreign inscriptions.

Attention! New pattern banknotes may be issued. If there are errors in operation of

detector during banknote verification, install a new firmware in service centre. During the

warranty period new firmware is installed for free.