Duxbury Networking DUX1016GFA Manuel d'installation - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Duxbury Networking DUX1016GFA. Duxbury Networking DUX1016GFA 4 pages. 16-port gigabit ai poe switch
Imprimer la page
INTRODUCTION
The DUX1016GFA is gigabit AI PoE switch with 16 PoE ports (10/100/1000Mbps) and
two Gigabit SFP Ports. It can deliver power to IP cameras, wireless access points or
bridges and IP phones. The product has four working modes, in AI VLAN mode, all
16 ports are isolated from each other to effectively prevent network storms and
improve performance. AI Extend mode allows effective transmission over 250m for
1-8 ports, which is suitable for remote monitoring and power supply. The AI Power
Supply mode ensures that the switch automatically assesses the working status of
the PD device and will automatically restart the device if there are any errors
detected. In AI QOS mode, the device prioritises video data processing when
the device is congested for smooth video transmission.
KEY FEATURES
Support 4 working modes: AI VLAN,
AI Extend, AI PoE and AI QoS
AI Extend: supports 250m long-dis-
tance power supply (recommended
CAT 5e or 6 network cable)
AI VLAN: all 16 ports are isolated
from each other to effectively pre-
vent network storms and improve
performance
ADDITIONAL FEATURES
Supports IEEE802.3af/at standard PD
devices
Supports uplink port auto-flip (Auto
MDI/MDIX)
Adopts store-and-forward exchange
mechanism
Intelligent power supply and lowest
power consumption to support the
power demands of the PD terminal
AI QoS: Prioritises identified video
data to make video transmission
smoother
AI PoE: Automatically detects the
power receiving port to find the dead
device and restart the device
With power 6kv circuit protection, it
protects the back-end equipment
security
Zero configuration: the correct power
is automatically supplied to the adap-
tive device
Fanless design to save energy and
protect the environment
Total power: 150W