Aus J DUO-10 Manuel - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Aus J DUO-10. Aus J DUO-10 9 pages. Mercury rv

10. Safety Messages

Under normal operating conditions:

1. The water temperature from the outlet pipe will not exceed 100°C.

2. When water reaches the pressure relief valve the water temperature will not exceed 93°C.

3. When the water temperature reaches 100°C the input energy would not exceed the energy

released.

The knob can only adjust the temperature to a maximum of 75°C, when the temperature reaches

75°C the power cycles automatically. The heater will also power off when the thermos-limiter

reaches 93°C. If both the knob and the thermos-limiter have failed and the temperature reaches

99°C, the T&P valve will drain away the water.

For inhibition of legionella, every 7 days the following water temperature and times must be held in

the tank.

Remark:

The red light will turn on when the supply voltage is 240V AC / 1000W. In these conditions the water

heater will take 45 minutes to heat the water from 15°C to 75°C and the light will turn off once the

temperature on the temperature knob is reached.

The blue light will turn on when the supply voltage is 12V DC / 300W. In these conditions the water

heater will take 2 hours 15 minutes to heat the water from 15°C to 70°C and then the blue light will

turn off.

Installation shall comply with AS/NZS 3500.4 and any relevant Australian Standards and industry

codes.