Duxot DX-2033-66 Manuel d'instruction - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Duxot DX-2033-66. Duxot DX-2033-66 19 pages. Automatic

USING THE SCREW-DOWN CROWN

DO NOT PULL THE CROWN UNLESS IT IS

FIRST:

NOTE: Failure to SECURELY screw down the crown

after setting the watch may affect its water

resistance.

TO UNSCREW: Turn the

crown anti-clockwise until it

turns freely without tension.

GENTLY pull the crown out to

the other desired positions for

watch setting (see specific

operating instructions on the

following pages).

TO SCREW: Push the crown

ALL THE WAY IN (towards the

watch) THEN begin to turn

clockwise until it is securely

screwed down.

BEFORE YOU USE THIS WATCH, IT IS

RECOMMENDED THAT YOU MANUALLY WIND

THE MAINSPRING TO START IT MOVING.

THIS WATCH IS AN AUTOMATIC WATCH EQUIPPED

WITH A MANUAL WINDING MECHANISM.

WINDING THE MAINSPRING

1. Unscrew the crown by turning it

anti-clockwise.

2. When it is in position [1], turn the

crown clockwise to wind. Wind

5-10 times and it will start to move

naturally after shaking slightly.

3. Push the crown in then screw it

securely.