ADE LW100 Series Manuel d'utilisation - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} ADE LW100 Series. ADE LW100 Series 20 pages. Electronic, price-computing calibrated retail scales
Imprimer la page
Check the delivery contents for completeness as soon as you receive the scale. Carefully
unpack the scale and accessories and remove all packaging materials.
Included in the delivery are:
- Price computing scale
- Weighing platform
- Power supply unit
- Operating manual
- Declaration of Conformity
- Optional: Rechargeable battery 6V 4Ah (installed in the scale)
On verified scales: Check the identity of the scale serial numbers and the
declaration of conformity. This is a mandatory requirement to use the scale in
legal metrology!
1.
Carefully unpack the scale and accessories and remove all packaging materials.
2.
Remove the transportation lock on the bottom of the scale, if present on your model. The
transportation locking device is identified by the labels below:
Not removing the transportation lock can lead to incorrect weighing
results!
3.
Place the scale on a level, stable surface. Do not place the scale on a shaky or vibrating
table as this will cause distortion of measurement results.
4.
Connect one end of the power supply to the power connector on the bottom of the scale
and the other end to the local power supply.
In this case, before connecting the supplied mains adapter to the scale,
make sure that the voltage on the nameplate matches the local power
supply.
After the warm-up time (15 minutes), the scale is ready for use.
The warm-up time applies to every disconnection from the mains
(except battery mode).
5.
Align the scale using the support feet. Make sure that the air bubble of the spirit level is
centred in the black frame.
Check the horizontal position of the scale
after every change of location!
LW100-210408-Rev002-UM-en
5. Scope of delivery
6. Start-Up the scale
5