ausdom ANC10 Manuel de l'utilisateur - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} ausdom ANC10. ausdom ANC10 4 pages. Active noise cancelling wireless headphones
Imprimer la page
Pairing with Bluetooth devices
1. Pairing the headphones with a computer
Before pairing the headphone with your computer, please make sure your
computer or laptop has the built-in wireless feature. If not, you must purchase a
Wireless dongle, preferably version 2.1 or above.
a) Make sure the headphones are off
b) Turn on the wireless on your computer
c) Wait until the "Search new device" pops up in the display
d) Don't put the headphones and computer more than 1m away from each other
e) Press and hold the power button on the headphones until they power on, but
don't let go. Continue holding the button until you see the LED indicator
flashes blue and red, which means the headphones are in the "pairing mode"
and you'll hear a prompt.
f) When the computer detects the new device, select "Ausdom ANC10" from the
list to pair. Once paired, the LED will turn to solid blue and you'll hear a
prompt.
2. Pairing the headphones with a phone
a) Make sure the headphones are off
b) Don't put the headphones and phone more than 1m away from each other
c) Press and hold the power button on the headphones until they power on, but
don't let go. Continue holding the button until you see the LED indicator
flashes blue and red, which means the headphones are in the "pairing mode"
and you'll hear a prompt.
d) Turn on the wireless on your phone and search for the new device
e) Select the "Ausdom ANC10" from the list to pair. Once paired, the LED will
turn to solid blue and you'll hear a prompt.
3. Connecting to paired devices
Ausdom ANC10 will pair with the last paired device automatically when turned
on. Because of different systems, some computers or laptops may need to be
manually paired every time.
Charging the battery
Use the supplied microUSB charging cable to recharge the battery. It takes
about 3 hours for the first charge. The headphone LED turns to solid red during
charging. When the battery is fully charged, the LED turns off. You can also use the
Wireless function during charging but will extend the charging time. If you use the
audio cable or turn the headphone off for charging that will not affect the charging
time. When the battery is low, the LED indicator light turns into solid red. At the same
time, the headphone also provides a low battery warning tone.