Friendly Robotics RV Series Manuel - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Friendly Robotics RV Series. Friendly Robotics RV Series 18 pages.

Imprimer la page

First use

Before using your robot for the first
time, the batteries will need approxi-
mately 8-12 hours to achieve a full
charge.
During operation
Several events will indicate that the
batteries need to be charged:
• The Battery Light will glow red
and the robot will stop cleaning.
• An "E1" error code is displayed
When the battery power is low, all
of the safety functions of the robot will
be fully functional. The Pull-line will
also function unless an "E1" error mes-
sage is displayed. (See "Display
Messages" section)
Plug charger into
wall outlet, then into
robot.

How to charge

Take the robot near an electrical
outlet by using the Pull-line
feature or carrying handle.
Turn the Cleaning Mode
Selector to OFF
• Charging the batteries
to full power will take
approximately 8 to 12
• The robot will clean for
approximately 1 hour on
carpet and slightly longer
• To maintain battery life,
charge batteries after
While the batteries are
each use and keep fully
charging, the Battery
charged when robot is
Light (A) will flash
green. When the
batteries are fully
• If storing the robot for
charged, the Battery
more than two weeks, it
Light will glow steady
is recommended that the
green.
removed from the robot
to maintain battery life.
The Batteries
hours.
on hard surface floors
when fully charged.
not in use.
batteries be fully
recharged and then
TIP
When the battery
power is low, all of
the safety functions
of the robot will be
fully functional.
Battery Replacement/
Recycling
Your cleaner contains sealed lead
acid batteries that must be
recycled.
When these batteries no longer
recharge, the batteries must be
removed and managed in
accordance with state
(province) laws. If you want to
replace the batteries in the
robot, contact your dealer.
Page
7