DV Signage POP-15N (M3-330) Manuel de l'utilisateur - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} DV Signage POP-15N (M3-330). DV Signage POP-15N (M3-330) 14 pages. Popstyle 15.6” network display

Imprimer la page

3.8 Network setup

Each PopStyle is shipped with DHCP settings (IP=0.0.0.0). In some network environment,

fixed IP could be used and you may need to change the PopStyle with the fixed IP settings.

All IP settings are set in a configuration file called "netcfg.ini". To change the IP settings on

PopStyle, copy the netcfg.ini file with your setting on to MEDIA folder on SD card and restart

the PopStyle then you will see a boot up message with your IP information changed.

The following is an example of fixed IP settings in netcfg.ini file.

In addition to IP information, the NETCFG.INI file contains some system settings for

ViewStream 505 media player. Below is a table to show all user settings in the NETCFG.INI

IO_OUTPUT_MESSAGE_THROUGH_232_ENABLE

VOLUME

FTP_UPDATE_ENABLE

TIME_ZONE

TIME_SERVER

DATALOG_DURATION_IN_DAY

CLEANUP_INTERVAL_IN_MINUTE

IO_OUTPUT_MESSAGE_THROUGH_232_ENABLE=

VOLUME=5

FTP_UPDATE_ENABLE=0

JPG_TRANSITION_EFFECT=OFF

TIME_ZONE=+0

TIME_SERVER=ON

DATALOG_DURATION_IN_DAY=31

CLEANUP_INTERVAL_IN_MINUTE=1440

DAILY_END_TIME_ENABLE=1

IP_OVERWRITE=1

IP=10.1.0.123

NETMASK=255.0.0.0

GATEWAY=10.1.0.1

DNS1=10.1.0.1

ITEM

DESCRIPTION

Enable message output on RS-232 port

0 = Disable message output

1 = Enable message output

Master volume set, Range (0-10)

[Default: 5]

Enable DV Connect mode

0 = Content pull mode

1 = Content push mode

[Default: 0]

GMT time zone setting

Format: +/- hhmm

[Default: +0000]

Set time server

OFF = Disable time server polling

ON = Enable time server "pool.ntp.org"

Max. day(s) to keep data log

[Default: 31]

Interval to clean up data log

[Default]

Page 9 of 14