DV8 SPJL-10 Manuel d'installation du produit - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel d'installation du produit pour {nom_de_la_catégorie} DV8 SPJL-10. DV8 SPJL-10 5 pages. 2018+ jl rear axle skid plate / dana 44

Imprimer la page

1. Begin by removing all parts and hardware and inspecting them for any abnormalities or

shipping damage. If you have any questions, please contact the company you purchased the

SPJL-10 from.

2. Begin by using a 10mm socket to remove the (4) factory bottom differential cover bolts.

NOTE:

You will not have any issues with leaking oil if only these (4) are removed. Do not pull

or pry on differential cover.

3. Once bolts are removed, hold your new axle skid plate up to the axle aligning these (4) holes.

Hand screw in the (4) factory bolts. Do not tighten at this point. The weight of the skid plate

should be able to be held on these loose bolts for now.