DV8 TC-6 Manuel d'installation - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} DV8 TC-6. DV8 TC-6 6 pages. Tire carrier

4. Pry out the rubber plug from the top of

the passenger side (right) of the RS- 10 or

RS-11 bumper. Drop in the new axle,

tapered side down thru the hole. Spin on

one of the new large nylock

nuts with one of the large washers be-

tween it. You wont be tightening till

you have the carrier on.

5. Slide on one of the new sealed bear-

ings over the axle and follow that with the

tire carrier and the second sealed bearing.

Note: Be careful letting go of the tire

carrier as it can swing around and hit the

Jeep.

6. Drop the new washer on top of the

second bearing and spin on the large ny-

lock nut. In order to tighten the carrier

you will be tightening both the top and

bottom of the axle shaft at the same

time. You can use a socket for the top

but will need a wrench for the bottom

nut. Note: Hand tighten only!

7. Bolt in the composite "U" shaped

piece on to the tailgate plate using sup-

plied nuts, bolts, washers and split-

washers. Firmly hand-tighten.