Datasheen D902AW Manuel de l'utilisateur - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Datasheen D902AW. Datasheen D902AW 19 pages. Adsl2/2+ wifi router

Imprimer la page

2.2 HARDWARE CONNECTION

Introduction：
1、 Use a telephone cord to connect the LINE port of the splitter with the RJ-11 port (the phone jack) on
the wall.
2、 Use another telephone cord to connect the ADSL port of the splitter with the LINE port of the ADSL
Modem.
3、 Use another telephone cord to connect the telephone set with the PHONE port of the splitter.
4、 Connect Ethernet port of the ADSL MODEM with 10/100BASE-T port of the computer using the
network cable that comes with the modem.
5、 Plug in the power cord, and turn on the power.
If you do not want Internet services and telephone voice services simultaneously, please just connect the
LINE port of the ADSL Modem with the RJ-11 port (the phone jack) on the wall using a telephone cord. In this
case, the splitter is not necessary.

2.3 LED STATUS INDICATION

Status
POWER (red)
Steady light
Power on
Flashing
/
Fast flashing
/
Off
Power off
Table 2.3
DSL (yellow)
The modem is in good
connection
In handshaking status
/
Connection not set up
Page 5
Datasheen D902AW User Manual
INTERNET (green)
Connected with PC
/
Transmitting
or
receiving
data
Not connected with PC
properly
WIRELESS(green)
Wireless
is
connected
/
Transforming data
Wireless is disabled
Total 19 Pages