DV8 OFFROAD RBJL-12 Manuel d'installation - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} DV8 OFFROAD RBJL-12. DV8 OFFROAD RBJL-12 13 pages. Jl mid width rear bumper
Imprimer la pageINSTALLATION
MANUAL
Begin by unpacking all items and
inspecting for missing pieces or damage. If
you have any concerns, please contact the
company the product was purchased from.
HARDWARE
INCLUDED
(2) M14x30 Hex Bolts
(1) M12 Flat Washers
(2) M14 Spring Washers
(11) M6x20 Allen
(2) M14 Flat Washers
(22) M6 Flat Washers
(2) M14 Nut Plates
(11) M6 Nylon Lock Nuts
(4) M10 Clamp nuts
(2) M4x15 Philips Head
(4) M10x25 Hex
Bolts
(4)M10 Flat washers
(2) M4 Flat Washers
(1) M12x40 Hex
(2) M4 Spring Washers
(1) M12 Spring Washers
(2) M4 Nuts
STEP 7 |
If equipped with factory
backup sensors, begin by removing the
harness from factory bumper to prepare
for install. Skip to step 13 if not equipped
with factory sensors.
If equipped with factory metal bumper,
you will be able to reuse the sensor
bezels/mounts. If equipped with factory
plastic bumpers, we highly recommend
using OE sensor bezels or DV8 part
#MPRSNSR-01.
Lay out the harness ensuring the main
plug for the harness is on the driver-side
of the bumper. Push out the DV8 sensor
plugs towards the front of the bumper.
NEED HELP?
855-680-9595