DV8 OFFROAD SPEC Series Manuel d'installation du produit - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel d'installation du produit pour {nom_de_la_catégorie} DV8 OFFROAD SPEC Series. DV8 OFFROAD SPEC Series 10 pages. Rear bumper for 2018+ jeep jl wrangler
Également pour DV8 OFFROAD SPEC Series : Manuel d'installation (12 pages), Manuel d'installation (10 pages), Manuel d'installation (9 pages)
Imprimer la page
INSTALLATION
MANUAL
Begin by unpacking all items and inspecting
for missing pieces or damage. If you have any
concerns, please contact the company the
product was purchased from. Extra hardware
may be included with the product.
HARDWARE
INCLUDED
(42) M6x20 Allen
(1) Nutsert Tool
(2) M6x25 Allen
(44) M6 Nutserts
(46) M6 Flat Washers
(4) M6 Serrated Nuts
FRONT INSTALL
STEP 8 |
Cut the front fender mount
off and grind it down so it is flush with
the vehicle. Paint is recommended on the
bare steel to prevent rust.
STEP 9 |
Install the provided
nutserts using a nutsert tool. If you do not
own a nutsert tool, we provide one with
our kit.
For instructions on how to use the nutsert
tool, scroll to the last page.
Tip: Hold up the fender the vehicle as a guide to
determine which holes require a nutsert.
NEED HELP?
855-680-9595