DV8 OFFROAD SRJK-08 Manuel d'installation - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} DV8 OFFROAD SRJK-08. DV8 OFFROAD SRJK-08 4 pages. Oe plus side steps
Imprimer la pageINSTALLATION
MANUAL
STEP 2 |
Drill out the front mounting
holes on the pinch weld using an 11/32"
drill bit.
If necessary, step up to a slightly larger
drill bit, but for our application an 11/32"
drill bit was enough to get our studs
through the pinch weld.
STEP 3 |
Re-install the steps by
guiding the studs through the pinch
welds.
Secure the steps main mounting brackets
to the body of the vehicle using the
provided M8 hardware with a 13mm
socket.
Use the wider M8 washers with this
hardware.
NEED HELP?
855-680-9595