DataTale FireWire 800 Manuel de l'utilisateur - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} DataTale FireWire 800. DataTale FireWire 800 14 pages. 4-bay smart raid system
Également pour DataTale FireWire 800 : Manuel de l'utilisateur (20 pages)

Imprimer la page

ASSEMBLING THE SATA 2.5" HDD ENCLOSURE

To begin using the DataTale Mobile 2.5" SATA HDD Enclosure Kit, simply

install a 2.5" SATA hard drive in the Enclosure and complete the assembly

steps outlined below:

1. Firmly push the lid down from front to back and open the Enclosure. After

the lid is opened, the PCBA board (Printed Circuit Board) should be

securely in place inside the Enclosure. One package containing the two

HDD screws and two case screws should be attached.

2. Carefully take out the PCBA board from the enclosure. Align the SATA

connector of the hard drive with the PCBA board. Carefully insert the SATA

connector into the slot on the PCBA board until it's firmly connected.