CONWIN Dual Split-Second Sizer Fiche d'instruction

Parcourez en ligne ou téléchargez le pdf Fiche d'instruction pour {nom_de_la_catégorie} CONWIN Dual Split-Second Sizer. CONWIN Dual Split-Second Sizer 4 pages.

Imprimer la page

Dual Split-Second Sizer

Instruction Sheet

Getting Started

• To prevent the risk of electrical shock, do not use the Dual Split-

Second Sizer outdoors when weather conditions are wet. Never

operate unit on a wet floor or work area.

• Prior to plugging the Dual Split-Second Sizer into an electrical

out-let, verify the electrical rating, listed on the label on the back of

the Dual Split-Second Sizer, is suitable for outlet.

• If the Dual Split-Second Sizer malfunctions or is damaged in any

way discontinue use and unplug unit from electrical outlet. Contact

an authorized Conwin Service Center for details on how to receive

service.

• Never attempt to repair the Dual Split-Second Sizer yourself.

Opening the Dual Split-Second Sizer case will automatically void

manufacturer warranty. Contact an authorized Conwin Service

Center for all repairs.

• When using helium or nitrogen, always secure the cylinder in a

safety stand or wall bracket.

Hand-tighten the primary regulator to a helium

or nitrogen cylinder. Make sure the cylinder is

properly secured in a safety stand or wall bracket

prior to attaching the primary regulator. Note:

Do not open the cylinder valve until Step 6.

Plug the foot pedal into the side of the unit.

Dual Split-Second Sizer Includes:

• 1 Dual Split-Second Sizer Inflator

• 1 Helium/Nitrogen Regulator

• 1 Supply Hose & Foot Pedal Control

• 2 Latex Balloon Filling Outlets

• 1 Power Cord

• 1 Double Bubble Outlet

Primary

Regulator

Push to connect the supply hose to the back outlet

on the Dual Split-Second Sizer.

Hand-tighten the blue inflating outlets.

On/Off

Adjustable Regulator

LED Mode

Indicator

Digital

Timer

Readouts

Foot

Pedal

Plug the power cord into the side of the unit

and into an electrical outlet. (A power strip

with surge protector is recommened.) The

digital display will appear when unit has

power.

Slowly open the cylinder valve. Make sure the

valve is fully opened. The cylinder pressure will

read on the gauge located on the regulator. The

inlet pressure will read on the second stage

regulator gauge, located on the back of the unit.