Aussie Scud 351 Manuel d'utilisation et d'entretien - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Aussie Scud 351. Aussie Scud 351 13 pages. Aussie scud series
Également pour Aussie Scud 351 : Manuel d'instruction de l'opérateur (16 pages)

Imprimer la page

OVERSPEEDING

Do not operate machine at over 3200rpm (engine speed). Over speeding can cause serious pump

damage.

EXCESSIVE BYPASS

Do not run on excessive by-pass. Switch machine off within two minutes of ceasing operation as

excessive by-pass can cause heat build up in pump and subsequent damage. Excessive bypass running

voids warranty.

HIGH PRESSURE SETTING

The high pressure pump is factory set to operate at its rated pressure. DO NOT ADJUST. Tampering

with the pressure regulator will void warranty and can be DANGEROUS.

CHECK NOZZLE MONTHLY

If pressure drops off check nozzle for wear. Nozzles should be replaced on a regular basis (every month

for machines in regular use, every three months for machines used intermittently). Using the machine

with the incorrect nozzle size or worn nozzle will void warranty and can be DANGEROUS to the operator.

PRESSURE CLEANER DAILY CHECK LIST

Check pump oil level

Check engine oil level

Check nozzle for wear

Check all high pressure components for leaks:

gun/lance

HP hose

all fittings

Check water filter and clean if necessary

Check unloader, safety valve and thermal dump for leaks

THREE MONTHLY REGULAR SERVICE

All professional machines need to be thoroughly serviced every three months. The service involved should

include the engine manufacturer's recommendations (see separate Engine Manual) and the following;

Change pump oil

Change gearbox oil (if applicable)

Check filter for foreign debris

Check unloader, safety valve and thermal dump for leaks

Check all HP components for leaks: Gun/lance, HP hose and all fittings

Replace nozzles

Check gearbox to engine key for wear, if key is worn see your local Aussie Eco Clean Service

Department. NB Damage generated by worn keys is not covered by warranty.

To maintain the Bertolini pump warranty (three years from date of purchase), the pump must be serviced by an

authorised service agent every six months. Contact Aussie for your nearest agent.

LOOK AFTER YOUR MACHINE AND IT WILL LOOK AFTER YOU!

Aussie HP Accessories ... making light work of cleaning chores

WEAR PROTECTIVE GOGGLES & CLOTHING!

WARNING

SIX MONTHLY REGULAR SERVICE

Australian Pump Industries Pty Ltd

7 Gladstone Road, Castle Hill NSW 2154

Ph: (02) 8865 3500 Fax: (02) 9894 4240