FrightProps HB-1ABV Manuel de démarrage rapide - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} FrightProps HB-1ABV. FrightProps HB-1ABV 4 pages. Wireless remote controls
Imprimer la page
JUMPER
PAIRING
BUTTON
PAIRING THE REMOTE
Now you must pair the remote with the base. Hold the white button
until the led comes on and release the button. Than press the remote
.button. The led will flash twice and is now paired with the base
HOW TO PROGRAM THE 1-RELAY WIRELESS TRIGGER
With power connected to the relay board hold the small
white button on the board down until the led turns on
and turns off. Keep holding it down until it flashes. 1
flash will put it in momentary mode. 2 flashes will put
it in latching mode, 3 flashes will put it in Inter-lock /
latched mode (this mode requires a remote with 2 but-
NOTE: Signal Interlock is not usable with these units
tons. One turns it on and two turns it off ) and 4 flashes
will put it in the delay mode